banner



How To Make A Usb Drive Bootable For Windows Xp

How to Setup Windows 11, Windows 10, Windows 7, Windows 8 / viii.ane / vista from USB drive?

You are here:  Tutorials > How to setup Windows 11, Windows x, Windows 7, Windows 8 / 8.1 / Vista from USB drive?

Step1: Create Bootable USB Drive

  1. Start PowerISO (v6.5 or newer version, download hither).

  2. Insert the USB drive you intend to boot from.

  3. Choose the bill of fare "Tools > Create Bootable USB Drive". The "Create Bootable USB Drive" dialog volition popup. If you are using Windows Vista or in a higher place operating system, you lot demand confirm the UAC dialog to continue.

  4. In "Create Bootable USB Drive" dialog, click "..." button to open the iso file of Windows operating arrangement.

  5. Select the right USB drive from the "Destination USB Drive" list if multiple USB drives are connected to the figurer.

  6. Choose the proper writing method. "USB-HDD" is recommended.

  7. Click "Kickoff" push to start creating bootable USB bulldoze.

  8. PowerISO will alert you that all data on USB drive will be destroyed. Click "OK" to continue.

    The programme volition outset writing USB drive, and showing the progress information. You should get the message "Writing USB bulldoze completed successfully." after the operation completes.

If no errors occurred in the above process, you should now be all set to setup Windows from USB bulldoze!

Stride 2: Configuring the BIOS

Yous should at present reboot and get into the BIOS configuration to boot from USB. Instructions for doing and so vary wildly from system to system, just generally entail the following:

  1. Reboot the organization.

  2. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are more often than not provided on the screen.

  3. Go to the section that contains your boot devices.

  4. With your USB drive plugged in, the USB drive should be listed. If information technology isn�t, your organisation might non back up booting from USB. Assuming that it is supported (as is the case with virtually all modernistic hardware), promote your USB bulldoze to the primary boot device.

  5. Go out from the BIOS configuration, saving all changes.

Please notice that yous can seriously screw upwards your system by providing incorrect BIOS settings!

Step 3: Booting and setup windows from USB bulldoze

Assuming that y'all properly configured your BIOS and your USB drive supports booting,  Windows setup should at present load. Depending on the speed of your USB bulldoze, this may take a while.

If it isn�t working, so double-check the following earlier making a scene:

  • Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it accept top priority?)

  • Have you correctly prepared the USB drive in step one? (Restart the procedure.)

  • Does your USB bulldoze properly back up being booted from? (Effort another one!)

Note: The higher up guide works with Windows 11, Windows 10, Windows seven, Windows eight / viii.1 / Vista. For Windows XP with SP2 or SP3 please refer to another guide at http://www.poweriso.com/tutorials/how-to-make-winxp-bootable-usb-drive.htm .

Copyright 2004-2022 Power Software Ltd. All rights reserved.

Source: http://www.poweriso.com/tutorials/how-to-make-win7-bootable-usb-drive.htm

Posted by: gingrichlailes.blogspot.com

0 Response to "How To Make A Usb Drive Bootable For Windows Xp"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel